Multi-enzymatic conversion of D-xylose to D-ribulose-5-phosphate coupled with ATP regeneration system
- 주제(키워드) multi-enzyme reaction , ATP regeneration , polyphosphate kinase
- 발행기관 고려대학교 대학원
- 지도교수 김경헌
- 발행년도 2022
- 학위수여년월 2022. 2
- 학위구분 석사
- 학과 대학원 생명공학과
- 원문페이지 61 p
- UCI I804:11009-000000257456
- DOI 10.23186/korea.000000257456.11009.0001240
- 본문언어 영어
초록/요약
D-ribulose-5-P (D-rul-5-P) is widely used in the synthetic chemistry and in cancer studies with regard to the cancer growth and survival. However, it is sold at a very high price. In previous studies trying to produce D-rul-5-P, first, D-rul-5-P was chemically synthesized from D-lyxose with 6 steps. However, it requires the purification step of toxic reagents. Secondly, to biosynthesize D-rul-5-P, D-xylose was used as a substrate and the yield of the reaction was 85%. However, as it was a two-step reaction, there was a purification step, and ATP, an expensive substrate used in the reaction, was not reused and wasted. Therefore, to solve these problems, ATP regeneration was introduced. In this study, ATP was regenerated by using polyphosphate kinase. It produces ATP from ADP, adding phosphate from its substrate, HMP, which has 6 phosphates. To optimize the multi-enzyme reaction conditions, the concentration of metal ions was first set. Co2+ and Mg2+ were used as metal ions as one enzyme cannot use Mg2+. Secondly, substrates for ATP regeneration system was optimized. HMP, the substrate for EcPpk, is negatively charged and has chelating effect on metal ions and ATP, the substrate for EcAraB, is very expensive, so a small amount was used and regenerated. Then, the enzyme loadings were optimized. As the enzyme loading ratio of EcAraB to EcPpk is crucial on regenerating ATP, their ratio was optimized, and then the total loading of 4 enzymes used in the reaction was optimized. Finally, reaction temperature was optimized and proved that 91.14% of D-rul-5-P was produced from 5 mM D-xylose, with a turnover number of 35.6 for ATP regeneration. This strategy presents a new perspective on the enzymatic production of sugar phosphate at a high yield, using a less amount of ATP by using an ATP regeneration system.
more목차
1. Introduction 1
2. Materials and Methods 5
2.1 Enzyme preparation 5
2.1.1 Cloning and overexpression 5
2.1.2 Enzyme purification 8
2.2 BpXylA enzyme characterization 9
2.3 EcAraB enzyme characterization 9
2.3.1 Enzyme assay 9
2.3.2 Effects of temperature, pH, and metal ions 10
2.3.3 Thermal stability 10
2.4 EcPpk enzyme characterization 11
2.4.1 Enzyme assay 11
2.4.2 Effects of temperature, pH, and metal ions 12
2.4.3 Thermal stability 12
2.5 Production of D-rul-5-P from D-xylose via multi-enzyme cascade with ATP regeneration system 13
2.5.1 Effect of metal ion cofactors 14
2.5.2 Effect of substrate concentrations 15
2.5.3 Effect of concentrations of EcAraB and EcPpk 16
2.5.4 Effect of reaction temperatures 17
3. Results and Discussion 18
3.1 Enzyme preparation 18
3.2 BpXylA enzyme characterization 19
3.3 EcAraB enzyme characterization 19
3.3.1 Effects of temperature, pH, and metal ions 19
3.3.2 Thermal stability 20
3.4 EcPpk enzyme characterization 22
3.4.1 Effects of temperature, pH, and metal ions 22
3.4.2 Thermal stability 23
3.5 Production of D-rul-5-P from D-xylose via the multi-enzyme cascade with an ATP regeneration system 25
3.5.1 Effect of metal ion cofactors 27
3.5.2 Effect of substrate concentrations 31
3.5.3 Effect of concentration of enzyme loadings 36
3.5.4 Effect of reaction temperatures 40
4. Conclusions 43
References 45

