검색 상세

Effects of lipopolysaccharide on changes in red blood cells in a mice endotoxemia model

초록/요약

이 연구의 목적은 lipopolysaccharide (LPS)를 이용하여 만든 생쥐의 endotoxemia 모델에서 24시간 동안의 적혈구 응집성과 변형성을 측정하고 적혈구 변형성을 예측하는 구체적인 shear stress를 제시하는 데에 있다. 실험 과정 상, 6주된 수컷 BALB/c 생쥐에 복강 내로 LPS (20mg/kg)를 주입 했고 적혈구 응집성을 평가하기 위해 Aggregation indices (AIs)와 T1/2를 측정했고 적혈구 변형성을 평가하기 위해 Elongation indices (EIs)가 사용되었다. 그리고 이 모든 과정은 LPS 주입 후 1, 2, 4, 6, 9, 12, 18, 그리고 24시간 후에 0.3, 0.5, 1, 3, 7, 10, 15, 그리고 20 Pa (Pascals) shear stress에서 측정되었다. 결과를 보면, AIs에서는 큰 차이는 없었지만 T1/2는 LPS 주입 후 2, 6, 12, 18, 그리고 24시간 후에 의미 있게 감소하였다. EIs는 LPS 주입 24시간 후 0.5와 1 Pa shear stress에서 의미 있게 증가하였고, 반면에 LPS 주입 24시간 후 10 Pa shear stress에서 의미 있게 감소하였다. 이를 종합해 보면, LPS 주입 24시간 후에야 적혈구 변형성은 감지 될 수 있었고 T1/2는 적혈구 응집성의 변화를 섬세하게 감지할 수 있는 가능성을 제시하였다.

more

초록/요약

The aim of this study was to evaluate changes in RBC aggregation and deformability over 24 hr and suggest specific shear stress values for detecting RBC deformability in a mouse endotoxemia model using lipopolysaccharide (LPS). Six-week-old male BALB/c mice received LPS (20 mg/kg) intraperitoneally. Aggregation indices (AIs) and T1/2 were measured to assess RBC aggregation, and elongation indices (EIs) were used to assess RBC deformability at shear stress values of 0.3, 0.5, 1, 3, 7, 10, 15 and 20 Pascals (Pa) 0, 30 min, 1, 2, 4, 6, 9, 12, 18 and 24 hours after the LPS injection. No significant differences were detected in the AIs during the study period, however, T1/2 shortened significantly 2, 6, 12, 18, and 24 hr after the LPS injection. The EIs increased significantly 24 hr after LPS injection at 0.5 and 1 Pa shear stress, whereas it decreased significantly at 10 Pa of shear stress 24 hr after the LPS injection. Altered RBC deformability was detectable 24 hr after the LPS injection and T1/2 may be a sensitive marker for detecting changes in RBC aggregation. The EIs should be measured at 1 Pa to detect changes in RBC deformability in LPS-induced septic mice.

more

목차

Contents

Abstract

I. Introduction 1

II. Materials and methods 3
1. Animals and blood sampling 3
2. Analytical procedures 4
3. Statistical analysis 6

III. Results 7

IV. Discussion 9

Acknowledgement 13
References 13
국문초록 22

more